Experimental analysis of different multilayer insulated façade
The presented work shows the results of the monitoring campaign conducted on two Cross
Laminated Timber (CLT) test box equipped respectively with a micro ventilated facade
and a thermal coat technology. Specifically, the experimental work was performed in order
to compare the temperature levels of the Isotec® wall micro ventilated facade respect to
traditional ETICS, with two different thermal mass, for facade insulation. The results showed
that the micro ventilated façade, due to the shielding and air cavity comined effect contributes
to reduce the summer heat stress with lower internal heat loads.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Papers published in Tema: Technology, Engineering, Materials and Architecture are protected by copyright, which is retained by the authors. Authors control translation and reproduction rights to their works published in Tema:Tempo,Materia,Architettura.
Permission of the author must be secured if a paper originally published in Tema:Tempo,Materia,Architettura is being considered for reprinting or translation. Authors are expected to ensure that any reprinting or translation contains a reference or pointer to the original paper published in Tema: Technology, Engineering, Materials and Architecture.
Authors submitting papers to Tema: Technology, Engineering, Materials and Architecture do so with the understanding that with Internet publishing authors and publishers do not always have the means to prevent unauthorized copying or editing of copyrighted works.
Downloads of papers in Tema: Technology, Engineering, Materials and Architecture are permitted for personal and educational use only. Commercial use requires explicit permission from the Editor-in-Chief.
We use a CC Attribution-NonCommercial-ShareAlike license.